Product care
General care instructions for clothing products
Clothing products suffer wear and tear, but you can take steps to ensure your apparel is cared for properly to extend the product's life and appearance. Below are tips for maintaining various types of apparel.
Regular apparel
Here are general tips that will extend the life of your garments.
Maintaining color
For natural fibers or cotton/polyester blends, you can improve the color fastness of your clothing by adding vinegar to the first wash load of dark colors.
Removing stains
To reduce permanent stains, treat the stain as quickly as possible. Start by blotting or sponging the stain to remove as much as possible before treatment. Never rub the stain - it can cause the stain to spread or force the stain deeper into the fabric.
Washing
To reduce wear from washing, wash clothing only when needed. Excessive washing causes clothing to wear out faster, so wearing a garment multiple times before washing extends the life of the garment. To reduce snags and damage from washing, ensure that garments are completely closed - zip-up zippers, secure any Velcro, and close all snaps and buttons.
Drying
To reduce heat damage from drying, hang dry your garments or dry flat if possible. Heat and agitation in the dryer environment can cause clothing to wear out much quicker. If you do choose to use a dryer, use the lowest heat setting.
Storage
If clothes are put away for an extended period, store them in a clean, dust-free and dry environment.
Washing and care for fleece products
Washing
Wash fleece apparel in cold water using the delicate or hand wash cycle. Separate wash loads by color and fabric weight. Washing light and dark colored clothing separately will help to maintain color integrity. Avoid washing lightweight clothing with heavyweight clothing - friction can damage the lighter weight fabrics.
Soaps and cleaning solvents
Use mild detergent, preferably non-toxic and biodegradable. Do not add bleach or fabric softener. Both can degrade fleece over time.
Drying
To reduce shrinkage, hang dry fleece clothing or dry flat. If a dryer is used, dry on low heat.
Ironing
Do not Iron 100% poly fleece. Iron on low setting if needed for cotton-majority fleece.
Washing and caring for rain jackets
Washing
Wash rain jackets with cold water on the delicate or hand wash cycle. To avoid friction and pilling, ensure all Velcro enclosures are sealed. Washing your jacket will help to maintain the water repellent features of your jacket. If you have a High-efficiency (HE) top-loader washing machine, check the machine manual since waterproof clothing can interfere with or cause damage to HE washing machines.
Soaps and cleaning solvents
Use mild detergent, preferably non-toxic and biodegradable. Do not bleach or add fabric softener, the strong chemicals can break down the waterproofing elements that keep you dry and happy.
Drying
When drying, hang dry or dry flat in areas with plenty of ventilation. This will prevent peeling or melting of the inner waterproof coatings. Garment can be tumble dried on low heat, but ensure garment is right side out and zipped up. The inner coating can stick to the walls of the dryer and cause friction, which may tear or melt the waterproof coating. If you are using the dryer, add a towel or two to absorb some of the moisture and help tumble the garment softer.
Ironing
DO NOT IRON. The inner coating and seam sealing is applied by heat and will melt if it comes in contact with high heat and may ruin your iron.
Storing
Make sure to hang your jacket until dry after use. Storing a wet crumpled garment can cause mold and mildew.
Washing and caring for windbreakers
Washing
Wash with cold water on the delicate or hand wash cycle. To avoid friction and pilling, ensure all hook and loop (Velcro) are closed.
Soaps and cleaning solvents
Use mild detergent, preferably non-toxic and biodegradable. Do not bleach or add fabric softener, the strong chemicals can break down the waterproofing elements that keep you dry and happy.
Drying
When drying, hang dry or dry flat in areas with plenty of ventilation.
Ironing
DO NOT IRON. The inner coating and seam sealing is applied by heat and will melt if it comes in contact with high heat and may ruin your iron.
Storing
Make sure to hang your jacket until dry after use. Storing a wet crumpled garment can cause mold and mildew.
Washing and caring for clothing with natural down insulation
Washing
Before washing, close all zippers and flaps, and brush off any loose dirt or grime. Then, turn your garment inside out if possible. Wash in a front load washing machine in cold water on a gentle cycle. The agitator in top load machines could damage your garment.
Soaps and cleaning solvents
Use mild detergent or down specific detergent to preserve the feathers and extend the life of the garment, preferably non-toxic and biodegradable. Do not bleach or add fabric softener, the strong chemicals can degrade the materials over time.
Drying
Dry on low to no heat, this might take a few cycles, but high heat can damage the feathers or the fabric.
To help restore the fluffiness of the down, add two or three clean tennis balls to your dryer. Check the garment every 15-20 minutes to pull apart clumps. This process will help ensure that feathers are distributed evenly, and the garment is completely dry which will prevent mold.
Ironing
DO NOT IRON. The inner coating and seam sealing may be applied by heat and will melt if in contact with high heat and may ruin your iron.
Storing
Before storing, ensure your garment is clean and completely dry.
Washing and caring for clothing with synthetic down insulation
Washing
Before washing, close all zippers and flaps, and brush off any loose dirt or grime. Then, turn your garment inside out. Wash in a front load washing machine in cold water on a gentle cycle. The agitator in top load machines could damage your garment.
Soaps and cleaning solvents
Use mild detergent or down specific detergent to preserve the feathers and extend the life of the garment, preferably non-toxic and biodegradable. Do not bleach or add fabric softener, the strong chemicals can degrade the materials over time.
Drying
Tumble dry on low heat, remove promptly after dry cycle.
Ironing
DO NOT IRON. The inner coating and seam sealing may be applied by heat and will melt if in contact with high heat and may ruin your iron.
Storage
Before storing, ensure your garment is clean and completely dry.
Guide to care for footwear
Best way to regularly clean your shoes
If your footwear becomes damp and covered with mud, clean them immediately after use, do not leave them dirty to dry. Corrosive natural chemicals such as acids and alkalis which are found in different soils and dirt can work their way into the material and start to slowly decay and rot them thus weakening the overall strength of the boots. This also prevents damage to any waterproof linings and membranes that are inside. The most effective way to clean your footwear is to immediately rinse them under clean tap water with a soft bristled brush. If possible, remove the insole inside the shoe and let them dry naturally. Do not under any circumstances put them in a clothes dryer, on top of a heater, near an open flame, or leave in direct hot sunlight.
Removing stains from shoes
Generally, a mild dishwashing detergent can remove most stains. For oil, grease, ink, sap or gum, denatured or isopropyl alcohol is considered a degreasing agent and works best as a spot cleaner and can safely remove stains from many fabrics and leather that aren’t affected by soap or detergent.
To remove stubborn stains, moisten a cotton cloth with a few drops of denatured alcohol. First test the alcohol on an inconspicuous part of the boot and allow it to dry. If there isn’t any discoloration, repeat and rub the stain, but do not saturate the fabric. Allow it to dry. Using a toothbrush or light bristled brush, clean the stain with a drop of dishwashing detergent and scrub until the stain disappears. Rinse the boot in warm water and damp dry with a clean towel. Fully let dry naturally!
Reapplying waterproof finishes on shoes
Most waterproof / breathable materials are treated with a water repellent finish, which keeps the outer material from becoming saturated with water so the breathable barrier can do its job. This coating needs to be reapplied every so often. A simple water drop test can be performed to see if the boot should be recoated. If water no longer beads up on the outside of the boot, it’s time for another surface treatment. There are several spray products on the market that can restore water repellency. Whichever you choose, be sure to follow the manufacturer’s instructions. Before these treatments can be applied and effectively work, the footwear should be clean and dry.
Repairing rubber boots
If a pair of rubber boots is damaged during wear, they generally can be repaired with a simple rubber repair or stick-on patch kit. These patch kits are available at any footwear retailer. First the boots must be clean and dry. Then follow the directions of the repair patch kit.
Repairing rubber outsoles
Over time, rubber outsoles can separate from the foam cushioning midsole or upper part of the footwear. This also can be repaired with a simple adhesive solution. Many footwear retailers offer various types of adhesives that can help repair this issue. Urethane adhesives work by coating both sides of the separation, letting it dry for a period of time and reactivating it with a heat source such as a blow dryer. A rubber-based adhesive is used more as a contact cement. The adhesive is applied to both sides of the separation and allowed to dry for a short period of time and then is pressed together. Again, the area should to be clean, dry and prepared. Always follow the manufacturer’s instructions.
Repairing leather or synthetic materials in shoes
There are leather repair kits available on the market that can repair rips, burns, cuts, and tears. Some can even touch up and re-dye worn or faded spots. There are specific kits for footwear. Upholstery repair kits can also work on leather boots and usually come with colored dyes to help mask the repair.